1 sp0635D2S1-CM1000HC-66R
Single-Channel Plug-and-Play Driver with Master/Slave Operation, Drives IGBTs from 1200V to 3300V with On-board DC/DC Converter
제품 상세 정보
1 sp0635SCALE-2 Plug-and-Play drivers safely and reliably drive 130 x 140 mm and 190 x 140 mm high-voltage and high-power IGBT modules ranging from 1200 V to 3300 V. They are optimised for use in high-reliability applications in the rail industry.
The drivers operate in a master/slave configuraion that allows the safe operation of parallel-connected IGBT modules. The master (1SP0635V or 1SP0635S) can be used as a stand-alone driver without slave to drive a single IGBT module or it can be used with up to three slaves (1SP0635D) to drive up to four parallel-connected IGBT modules.
The master drive is equipped with a fiber-optic interface and global fault management. In master/slave configurations, the slaves are connected to the master by a bus cable which distributes the common command signal and the secondary-side supply voltages from the DC/DC converter.
1 sp0635drivers are based on Power Integrations' highly-integrated SCALE-2 chipset. Therefore the single-channel drivers are high-performance, complete and extremely compact. The SCALE-2 chipset also reduces the component count by up to 80% compared to conventional solutions, thus significantly increasing reliability and reducing costs.
The drivers are equipped with Dynamic Advanced Active Clamping (DA2C), short-circuit protection, built-in DC/DC converters, regulated turn-on gate driving voltage and supply-voltage monitoring.
Perfectly-matched drivers are available for all mechanically-compatible IGBT modules. Plug-and-play configuration allows immediate operation after mounting, so the user needs to invest no time and effort in designing or adjusting the driver for a specific application.
Fiber-Optic Interface Options
Fiber-optic links are used to provide electrical insulation for the command and status-feedback signals. Two versions of fiber-optic interfaces are available:
- 1 sp0635V, equipped with Versatile links
- 1 sp0635S, equipped with ST links
For details, please check the product documentation.
명세서
지원되는 모듈 | CM1200HC-66H |
최대 스위칭 주파수 | 6.60 kHz |
IGBT 전압 등급 | 3300 V |
기술 | SCALE-2 |
출력 전력 / 채널-최대 | 3.00 W |
작동 온도 (최소) | -40 ℃ |
작동 온도 (최대) | 85 ℃ |
인터페이스 유형 | Fiber Optic |
IGBT 제조업체 | Mitsubishi/Powerex |
채널 수 | 1 |
게이트 피크 전류 (최대) | +35 A |
상품 유형 | Board |
Product Sub-Type | PnP Driver |
지원되는 모듈 유형 | IGBT |
메인 / 주변 | Peripheral |
지원되는 토폴로지 |
2-level Voltage Source
三级NP-Clamped - 1型
三级NP-Clamped - Type 2
Multi-Level NP-Clamped |
보호 기능 |
Dynamic Adv Active Clamping
Over-voltage
Short Circuit
UVLO(Sec-side) |
드라이브 모드 | Direct-Independent |
IGBT에 대한 연결 유형 | Direct |
공급 전압 (일반) | 15.00 V |
게이트 턴온 전압 | +15.00 V |
게이트 턴 오프 전압 | --10.10 V |
전압 - DC 링크 꺼짐 상태, 60 초 | 2700.00 V |
시간 - 출력 상승 | 9.00 ns |
시간 - 출력 하락 | 30.00 ns |
격리 기술 | Galvanic |
격리 유형 | Basic |
보관 온도 (최소) (°C) | -40.00 ℃ |
보관 온도 (최대) (°C) | 50.00 ℃ |
게이트 피크 전류 (최소) | -35 |